Radio Systems CT-2002 Betriebsanleitung PDF herunterladen (Seite 14)

Radio Systems, Inc. CT-2002 Manual

Page 13

Master Driver

Additional Operating Instructions

(For units equipped with the optional master driver board)

To Set the Time (on clock power up)

1. Clock will power up in the set mode at 12:00:00. The display will be frozen.

2. Press the STOP button to advance hours. Press the RESET button to advance

minutes. (Seconds cannot be adjusted.)

3. At the top of the minute exactly, press START.

To Adjust the Time (on running clock)

1. Desktop models - press and hold the STOP and START buttons.

Large models - press the set button.

2. The display will flash

To adjust the time Press and release the STOP button to add one second.

Press and hold the STOP button to add one hour.

Press and release the RESET button to lose one second.

Press and hold the RESET button to lose one hour.

To reset the time Press mode (this must be done prior to adjusting the time).

Display will reset to 12:00:00 and freeze.

Press the STOP button to advance hours.

Press the RESET button to advance the minutes.

3. Press START to resume normal operation

Battery Lamp

The front panel battery lamp will light when the internal 9V backup battery needs

to be replaced.

Note - in the event of a power failure, the battery backs up timer memory only.

The display will not illuminate a during power failure.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Keine Kommentare

Radio Systems CT-2002 Betriebsanleitung Seite 14